TDA6500 - (TDA6500 / TDA6501) 5V mixer/oscillator and synthesizer

NXP Semiconductors

The TDA6500 by NXP Semiconductors is a (TDA6500 / TDA6501) 5V mixer/oscillator and synthesizer. Below is the official datasheet preview.

Datasheet Details

Part number	TDA6500
Manufacturer	NXP Semiconductors
File Size	278.34 KB
Description	(TDA6500 / TDA6501) 5V mixer/oscillator and synthesizer
Datasheet	TDA6500_NXPSemiconductors.pdf
Additional preview pages of the TDA6500 datasheet.

TDA6500TT and TDA6501TT are programmable 2-mixer, 3-oscillator and synthesizer MOPLLs intended for pure 3-band tuner concepts.

s Single-chip, 5 V mixer/oscillator and synthesizer for TV and VCR tuners s I2C-bus protocol compatible with 3.3 V and 5 V microcontrollers: x Address + 6 data bytes transmission x Address + 1 status byte (I2C-bus read mode) x Four independent I2C-bus addresses s Two PMOS open-drain ports with 5 mA source capability to switch high band and FM sound trap (P2 and P3) s One PMOS open-drain port P1 with 20 mA source capability to switch the mid band s One PMOS open-drain port P0 with 10 mA source ca.

📁 TDA6500 Similar Datasheet

TDA6500TT - 5 V mixer/oscillator and synthesizer for PAL and NTSC standards (NXP)
TDA6501TT - 5 V mixer/oscillator and synthesizer for PAL and NTSC standards (NXP)
TDA6502 - 5 V mixers/oscillators and synthesizers for cable TV and VCR 2-band tuners (NXP)
TDA6502A - 5 V mixers/oscillators and synthesizers for cable TV and VCR 2-band tuners (NXP)
TDA6503 - 5 V mixers/oscillators and synthesizers for cable TV and VCR 2-band tuners (NXP)
TDA6503A - 5 V mixers/oscillators and synthesizers for cable TV and VCR 2-band tuners (NXP)
TDA6048-5X - Multistandard Sound IF (Siemens Semiconductor)
TDA6050-5 - Video IF with FPLL/ MAC State (Siemens Semiconductor)

Other Datasheets by NXP Semiconductors

Published: May 10, 2009 |